These high pressure, large volume 4-phase separators are designed for MP-UBD applications and help our customers optimize their drilling programs to enhance overall hydrocarbon recovery and therefore maximizing profitability.

Features

• 34 mmscf/d max throughput gas and 20,000 bbls per day fluid
• 275 psi pressure rating on the vessel designed to allow maximum operating pressure while not having to downgrade other equipment downstream of the separator.
• State of the art real time data acquisition system.
• 5,000 psi piping and manifolding.
• Four phase separator
• Two 720 psi sample catchers for geological samples
• 8" x 80' flare stack with electronic igniter system
• Separator designed as per ASME code section VIII Division 1 as well ABSA U stamped

Benefits

• Quick set up and tear out
• Small foot print
• Dual sample catchers
• Real time data monitoring
• Highly experienced crew for MP-UBD operations

Vertical Separators

Features

• Capable of flow through in excess of 21 mm scf/day of gas and 15,000 bbls per day of drilling fluid
• 3,000 psig rating for piping and manifold
• Rated to 125 psi 11 m3 closed system
• Reliable time tested gas monitoring
• Manufactured to NACE and ASME requirements

Benefits

• Capable of UBD, MPD, and as an addition on conventional wells for kick / loss management
• Quick set up and tear out
• Cone separator design results in quick efficient clean up of drilled solids
• Small footprint
• Zero ground disturbance 6" x 60' flare stack with electronic igniter
• Tie in points for DAQ systems